Hella Marine 350 Amp Battery Master Switch

Wall-mounted battery switch. Necessary for a simple economical way of separating two batteriesThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107)Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features250 A max. 1000 ADimensions: 69 x 69 x 75 mmTinned copper studs 8 mm (5/16'')Stainless steel washers / nutsFiber-reinforced plastics3 removable side panels for protectionTermination Stud Size: 3 x 8 mm (5/16'')Operation: 1-2-Both-OFFDegree of Protection: IP 56Max. Voltage: 48 V DCBattery switch with ''Contour Lock System'' with removable side panels. This allows flexible installation - several switches can also be combined into one unit, as is required, for example, in vehicle electrical systems that are fed by two or more batteries or that are supplied by more than one alternator. Rotary switch with rest stop in the 4 switch positions batteries 1, 2, 1+2 and 0 (off)
more information